ISO 17201-5:2010

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ 18 يناير 2010 ·

Acoustics — Noise from shooting ranges — Part 5: Noise management

الهندسة العسكرية. الشئون العسكرية. الأسلحة
* الملابس العسكرية، انظر 61.020
المرافق الرياضية
* تشمل برك السباحة، الملاعب الرياضية، ميادين السباق والجري ، الخ
الضجيج المنبعث من الآلات والمعدات
* تُستخدم المواصفات الواردة في هذا القسم أيضاً مع أقسام أخرى و/أو تقسيمات فرعية وفقاً لموضوعاتها

ملفات الوثيقة ISO 17201-5:2010

الإنجليزية 25 صفحات
الإصدار الحالي
55.56 BHD

مجال الوثيقة ISO 17201-5:2010

ISO 17201-5:2010 gives guidelines for noise management of shooting activity at shooting ranges. The control of the noise received outside shooting ranges at specified reception points based either on measured or calculated sound exposure levels is specified. ISO 17201-5:2010 can also be used in the planning of new or reconstruction of existing ranges. It is intended to comply with all relevant local rules and regulations which imply a conversion of sound exposure level to other indicators as given in ISO 17201-3.

ISO 17201-5:2010 applies to weapons with calibres of less than 20 mm or explosive charges of less than 50 g TNT equivalent and pressures of less than 1 kPa at the reception point.

NOTE National or other regulations, which could be more stringent, can apply.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013 
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 12224-1:2024
 
مواصفة قياسية دولية
Solder wire, solid and flux-cored — Specification and test methods — Part 1: Classification and performance requirements
ISO 33405:2024
 
مواصفة قياسية دولية
Reference materials — Approaches for characterization and assessment of homogeneity and stability
ISO 33406:2024
 
مواصفة قياسية دولية
Approaches for the production of reference materials with qualitative properties
ISO 12224-2:2024
 
مواصفة قياسية دولية
Solder wire, solid and flux-cored — Specification and test methods — Part 2: Determination of flux content